Popular Tags

  • Need complete steps SAN monitoring with BSM from Side

    Hi Team, I need complete and details steps what steps we (BSM) need to do post configured all the storage devices with SNMP Traps to receive alerts in BSM. I have OBM console admin access . I got the storage devices list also. So here from BSM…

  • RE: SNMP Trap policy customisation

    Hi Subin, In NNMi to OBM integration, there is a trap interceptor policy created and hosted in your OpsC or your OBM server depend on your architecture. In the policy interceptor, you can add the same OID multiple times (copy rule) and modify…

  • log file monitor | run alerts for each log entry matched | snmp does not work

    Hi Experts!! Good day. I am facing a odd issue related to log file monitor. there is a logfile with about 12 lines, all these lines means error, so 12 different alerts/incidents. the point here: I am able to see the alerts into alert.log, but the forwarding…

  • unable to match variable which is type octetstring

    Dear Experts, an application is sending traps to OMi Server and using SNMP policy i can capture it but i want to capture it using a condition on $67 as this contains severity. This is how this variable look like in Event original data: [67] .1.3.6.1.4…

  • Is it possible to send one error trap per counter from the same monitor/alert?

    Hi there!! Is it possible to send one error trap per counter from the same monitor/alert? I have one monitor, with lot of counters. When the monitor has more than one counter with error, the monitor aggregate the information into the same trap. I'd like…

  • Can SNMP Interceptor Policies be Converted Into opcmsg Policies

    I’ve never encountered such a thing in my entire career, and do not see a way to even introduce SNMP VARBINDs into an opcmsg policy in OBM 2018.11. Any assistance would be greatly appreciated. Thanks, ~ OpenView Mike

  • Is It Possible to Convert and SNMP Interceptor Policy to an opcmsg Policy?

    I’ve never encountered such a thing in my entire career, and do not see a way to even introduce SNMP VARBINDs into an opcmsg policy in OBM 2018.11. Any assistance would be greatly appreciated. Thanks, ~ OpenView Mike

  • SNMP configuration

    Hi, After install a 9.26 version of BSM, we are going to configure the SNMP traps. We have the MIB file ready but we dont know how to load it in the BSM and we are not finding documentation clear about that. Could you please guide us about how to do and…

  • ALM/PC | SNMP Monitoring | Unable to Get Counters

    Hello All, I am trying to set up an SNMP MONITOR resource in ALM (12.01), for a DataPower appliance, After filling in the Server IP/hostname in the required field, and hitting GET COUNTERS, I get an error stating - Failed to retrieve measurements. Please…

  • (OA12) Support Tip：How to troubleshoot for getting SNMPv3 info via opcmona in OA12

    1. Check if the following settings were set under eaagt namespace. SNMP_V3_ENABLE=TRUE SNMP_V3_USERSDATA = <user name>:<authentication method (MD5/SHA)>:<Encrypted authentication password>:<encryption method (AES/DES)>:<Encrypted encryption key>:<Engine…

  • SNMP traps information in BPM

    Hi Folks, We are sending SNMP trap alerting method when the synthetic transactions fail for one of our application, And these traps are caught by the OVO policy on the Trap receiver server. Not sure what each varbind in the trap corresponds to . I need…

  • SNMP traps are not processing correctly

    Hello all, I have been working with HP support on an issue for a couple of weeks and so far we have not made much progress, so I am hopeful that maybe one of the online experts might have some insight. On Oct 19th I patched my OMW 9.0 server with OMW_00187…

  • SNMP Trap

    we are sending snmp trap from from Sitescope to NNMi . As snmp protocol is connectionless some of the traps are missing For example if we are sending critical traps and if no followup alarms received this will lead to SLA breach . any workaround ?

  • snmp device -omw

    Hi We have OMW in our environment and we're monitoring the SNMP devices. But I noticed we received too much message that not required. I have "external node" and I'm flooding too much alert Now, I want to limit to received only message from the below…

  • Error:Validation of SNMP on a WIN 2003 server

    Hi, While validating SNMP agent on a managed node i'm getting the following error. C:\PROGRA~3\HP\HPBTOS~1\bin\INSTRU~1>"C:/Program Files/HP/HP BTO Software\bin\OpC\Perl\bin\perl.exe" "C:\ProgramData\HP\HP BTO Software\\bin\instrumentation\winall_test_snmp…

  • SNMP Trap Intercepter Policies

    Hi, I have done an agent based NNMi-HPOM integration and during the integration , created a policy of trap defnition from NNMi and deployed via HP OM as a policy to the NNMi Node . Is it possible to have more that one trap intercepter policies to be deployed…

  • Sitescope Template SNMP

    Using SNMP template in Sitescope SNMP Trap Alerting, how can I specify the type of the OID (string, ip_address, integer, octet-string,octet-hex) [OID: .1.3.6.1.4.1.11937.1.46.10]<value> [OID: .1.3.6.1.4.1.11937.1.42.1.3.1]<value2> [OID: .1.3.6.1.4.1.11937…

  • HP OMw 9.0 can supports SNMP v2?

    Hi Experts, I have a question, HP OMw 9.0 can supports SNMP v2, if this is possible, how can i do to setup this?. Thnaks in advance.

  • [ST OMU] opctrapi Receiving SNMP PDU failed, error decoding message, Unsupported V3

    [ST OMU] opctrapi Receiving SNMP PDU failed, error decoding message, Unsupported V3 PROBLEM: customer getting error: 0: ERR: Mon Jan 13 09:56:48 2014: opctrapi (11140/47705906706896): [opcevti.cpp:1876]: Receiving SNMP PDU failed: Error decoding message…

  • HP SiteScope - How to configure SNMP Traps

    Dear Experts, I am currently using Sis 11.22 installed on RHEL. I dont have too much experience with SNMP Traps. Can someone please tell me how would I configure Sis to recieve the SNMP traps so I can create the monitor in SiteScope? Or at least can someone…

  • RE: OVPI Interface Reporting Issues

    I see that the device is giving the SNMP_TIME_OUT .. Do the following : (1) Goto the device and Uncheck the SNMPv2 and Check only the SNMPv1 . (2) Increase the SNMP Timeout for that device .. (3) Rerun the given command and wait for sometime , hopefully…

  • Send SNMP trap from the HP OMW system

    Hi, I have HP OMW version 9, and I have been asked to transfer some of the alerts, that related to secutiry, to the arcsight system. Since I didn't found any integration between the systems, I am thinking to create autonatic action, for some of the alerts…

  • Forwarding the OMU Events as SNMP traps to Nimbus tool

    Dear Experts, We have requirement to forward the omu events as a snmp traps to the nimbus tool. Can any one has idea how to forward the OMU events as SNMP traps to Nimbus Tool and as per my understanding nimbus will accept only Snmp traps not event. Thanks…

  • HP OM receiving SNMP

    Hello! I have: 1) OMW Version 9.0, on the Win2008 r2. 2)server on Win serv 2008 r2 (name- One) Server One - install agent v.11 I need: server generates SNMP. Each SNMP trap is assigned its value? How can I configure the HP OM for receiving SNMP. Thx.…

  • Forwarding the OMU Events as SNMP traps to Nimbus tool

    Dear Experts, We have requirement to forward the omu events as a snmp traps to the nimbus tool. Can any one has idea how to forward the OMU events as SNMP traps to Nimbus Tool and as per my understanding nimbus will accept only Snmp traps not event. Thanks…

Resources

Support
Documentation
Learning Services
Partner Programs
Privacy
Compliance
Help
Company
Privacy Policy
Terms of Use
Cookies Preferences
Accessibility
Anti-Slavery Statement
Support
Contact Us
Careers
Code of Business Conduct and Ethics
The opinions expressed above are the personal opinions of the authors, not of OpenText. By using this site, you accept the Terms of Use. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.), Hewlett Packard Enterprise Company, or Micro Focus. As of January 31, 2023, the Material is now offered by OpenText, a separately owned and operated company. Any reference to the HP, Hewlett Packard Enterprise/HPE, and Micro Focus marks is historical in nature and the HP, Hewlett Packard Enterprise/HPE, and Micro Focus marks are the property of their respective owners.