• Unable to manage Node with ESX Monitoring

    Hi community, I'm facing an issue with my NNMi and VM Monotoring. I configured my NNMi to monitor ESX by importing Certificat and provide user/pwd. Now all VMs running on my ESXs are automatically discovered and created in NNMi Inventory as VMWare…
  • Management Address missing in OPTIC DL vertica database

    Hi Community, I was looking for NNMi Nodes management address data/column in OPTIC DL vertica database but unable to get these data. I'm assuming management address is not available on vertica DB, isn't it. Is there any way to get these data on…
  • Test

    TEST
  • How to add or change NNMi logo on login page and web console instead on OpenText Logo

    Hi Community, I want to change OpenText logo in NNMi console. If logo change is not possible then any way around to add a new logo beside openText. I'm using NNMi v 23.4 Thanks in advance.
  • NNMI 2023.05 Incident Enrichment issues

    Hi, Experts, I faced very strange issue with Incident Enrichment. I created enrichment rule, Enrichment Reports tells that payload filter is matched and event will be enriched with S everity= Normal severity and Correlation Nature= none. However newly…
  • custom poller fails with Missing Filter configuration: required for table entry MIBs used in MIBexpression

    NNMi 23.4 P2 custom poller fails with Missing Filter configuration: required for table entry MIBs used in MIBexpression It's a very simple one using a predefined MIB-expression, here you see we want to monitor the line with the value of 27 and get…
  • Upgrading AWS EKS Version on Optic Data Lake

    Hi Team, We are currently running Optic Data lake version 2022.11 on our AWS environment. The EKS version that we are currently on is going to be end of life soon and we would have to upgrade to a later supported version. My question is whether we can…
  • is it possible to export NNMi Incidents what would see when(time/date) Incident were assigned to some person?

    is it possible to export NNMi Incidents what would see when(time/date) Incident were assigned to some person? Customer asked that, and here are the methods to do this high and wide, had somebody done this and what would be the easiest way to achieve…
  • Generate a single incident that represents a "consolidated interface status" for an equipment on NNMi

    I am looking for a mechanism to generate only 1 incident each time when different interfaces go Down or Up on an equipment. Each time an interface goes down, I wish that NNM checks the status of all interfaces and generates an incident on the node with…
  • Unexpected issue with critical NNMi services reported as not found.

    Hello, We experienced something which doesn't have any sense. Running NNMi 2022.05P3 I restarted yesterday NNMi services and after they came up we realized some of the crucial/important services are not started and they are reported to be NOT FOUND…
  • Mosts Actions --> Node Access Menu points don't work anymore with NNMi 23.4

    Mosts Actions --> Node Access Menu points don't work anymore with NNMi 23.4 Do we have a solution for this? NNM 23.4 NNM Patch: NNM234_00002 Linux Postgres DB Standalone Many Actions --> Node Access Menu points don't work anymore with NNMi…
  • when we create an Interface group using neighborHostenOn attribute it does not list any interfaces and gives error.

    NNMi 2023.4 P2 on Linux
 Oracle Remote DB Application failover Production we have a problem with NNMi that when we create Interface group using neighborHostenOn attribute it does not list any interfaces and gives error. Table View viewInfo:Interfaces…
  • why "Administrative State & Operational State" on the interface has the status "not polled" ?

    hi All we have NNMi version 2019.11 instaled on rhel 7.4 maipo I want to ask , is there a way to change the status to "up"? thankyou
  • where can the we configure the system health trsholds for stale collections

    NNMi 23.4 Linux-Standalone Customer gets all the time system help messages: Stale collections (8) has status Major because there were between 5 and 10 stale collections in the last 5 minutes. Some of the nodes are not responding at all, and the…
  • How to Change the IdM host in NNMi?

    How to Change the IdM host in NNMi: Use case, previously there was an oldserver.masked.org used as Performance Troubleshooting only container, now we want to replace that with an Optic Solution hosted on newserber.masked.org how can we configure that…
  • NNM-NA Integration is not responding.

    Hi Folks, I'm encountering an issue with enabling NNMi-NA integration. After clicking the submit button, it keeps loading indefinitely, without displaying any error or success message. This problem started after upgrading to NNMi 23.4, as it worked…
  • Standby node in AppFailover cluster reports: STANDBY_DB_FAILED START_FAILED (NNMi 2022.05 with no patches )

    Hello, I noticed that the standby node in our AF cluster has been showing STANDBY_DB_FAILED START_FAILED state since a few weeks. Local? NodeType State OvStatus Hostname/Address ------ -------- ----- -------- ---------------------------- * REMOTE…
  • REST API Equivalents to nnmnodedelete & nnmseeddelete

    We have NNMi doing discovery for network devices. Then NNMi integration pushes the node topology to uCMDB. When we delete a node from NNMi, it is not automatically deleted from uCMDB. If there is an option to do that, I would appreciate any information…
  • Unable to discover IP Telephones in NNMI

    Dear Community Members, Trust you are doing well. This question is in reference with issue while discovery of IP Phones via ispi for Telephony. I have installed NNMi 24.2 on windows server 2019 and on the same server i have installed ispi for Telephony…
  • Vertical scrollbar missing in Chrome and Edge in NNMi in node group config-->additional filters

    customer reported a strange issue. he noticed that in Additional Filter tab for a node group definition a right vertical is missing when working with Edge or Chrome browsers. They say it happened after the browsers were updated to the latest versions…
  • NNMi Pushing Software Version to uCMDB

    Does anyone know if there is a way within NNMi to push the network device software version to uCMDB? We added the software version to the NNMi uCMDB attributes mapping json file. As expected, it was not pushed to uCMDB. If there are no other options…
  • Getting Transaction rolled back Error while trimming the incidents - NNM

    Getting Transaction rolled back Error while trimming the incidents - NNM Kindly suggest with any solution. NNM version: 2021.05 [root@NNMGN101 bin]# ./nnmtrimincidents.ovpl -date 2023-10-06 -trimOnly -sysobjectid .1.3.6.1.4.1.46634.1.1.33.7 -family…
  • While installing the hotfix getting "(you may need to install the String::CRC::Cksum module)" on Traffic servers

    [root@NNMMCN001 support]# ./nmshotfix.ovpl -i /opt/TrafficPatch/Hotfix-TRFM-2021.05-CORE-20220502.zip Can't locate String/CRC/Cksum.pm in @INC (you may need to install the String::CRC::Cksum module) (@INC contains: /opt/OV/nonOV/perl/a/lib/site_perl/5…
  • NNMi SNMP Context Polling

    NNMi version 23.4 We are an ISP using Cisco ASR9Ks that have many VRFs and Bridge Domains configured. Currently we have not defined snmp context names and mapped them to community strings for the VRFs and bridge domains because it requires a lot of…
  • NNMi CE

    Hi, sorry for a silly question. What is "NNMi CE" ? Containerized Edition or Classical Edition or something else? thank you, Gedas