OpenText Dimensions CM Community

We need to decrease the default session_timeout value "3600" of listener.dat of Dimensions 14.5.3, 14.6 and future versions.

systex systex

Hi All, https://knowledgebase.serena.com/InfoCenter/index?page=content&id=S141609 -session_timeout Default 3600 at installation Minimum 3600 (1 hour) According to the above URL of knowledge base, we realize that session_timeout value is the key…
- over 1 year ago
- OpenText Dimensions CM
- Dimensions CM Ideas
If Dimension CM can add function for customized timeout (like less than 30 mins) setting in future release.

systex systex

Hi All, If Dimension CM can add function for customized timeout (like less than 30 mins) setting in future release. We need the customized timeout function can be added to Dimensions CM Web and Dimensions CM admin console. Thanks! SYSTEX
- over 1 year ago
- OpenText Dimensions CM
- Dimensions CM Ideas
We recommend providing Dimensions upgrade installation kits in the future.

systex systex

Hi All, In light of our experiences about upgrading Dimensions CM from earlier versions to the latest versions. Especially upgrades between generations, such as upgrading from 14.3 to 14.5.3. We need to perform tedious upgrade steps, and it take so…
- over 1 year ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Update DOORS --> Dimensions Integration

Nicholas Perry

Update DOORS --> Dimensions Integration to allow use with DOORS versions greater than 9.6.1
- over 1 year ago
- OpenText Dimensions CM
- Dimensions CM Ideas
show popup information message when mouse over (i) logo in Dimension CM Requests

Satish Kumar t

Application : Dimension CM Features : Dimension CM request need to have (i) logo and when mouse is over on it, it has to show information about the option. it will help to give understanding to the use about the purpose of the option.
- over 2 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Prevent the user to check in files when File size not more than XXXMB

RAMASAMY BHARATHARUN

Hi Team, It would be great if dimensions CM have an option to Prevent the user to check in files when File size not more than XXXMB! Thanks, Arun.
- over 2 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
DMCL command or web service to cancel a running build job

Merlin Ho

I having been using ALF event from SBM to integrate with Dimensions CM for a couple of months. Recently, I was asked to cancel a running build job of Dimensions from SBM when the job was running. However, after consult to the support team, I was told…
- over 2 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
improve use of "Preview tab" in Open Request GUI for WebConsole

marcP-GDIT

when using the Open Request GUI for SERVER:PORT/dimensions/?jsp=edit_chgdoc_master&ChangeDoc=TU52167538,.C],PRODUCT_REQTYPE_ID#,.C]] , there is a tab marked Preview . In Internet Explorer (now deprecated) the page used to be displayed as an HTML Webpage…
- over 2 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Each of the new work area need re-enter node user ID and node password

Ka hou Chong

Hello, When I have many AP server and need to new work area, if need to new about 20 work area, I need to re-enter user ID and password 20 times. Can add a manage account page that can save work area user ID and password? After that when I want…
- over 3 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Add support for multiple request providers in Dimensions CM

Julian F

I can currently use ALM Octane, SBM and Dimensions CM Requests in Dimensions CM, but at the moment my selection is limited to one type per product. I need to use Dimensions CM and ALM Octane in the same product to track all of my project actions.
- over 3 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Automatic Status email

marcP-GDIT

Is it possible to schedule an email originating as an Email Event that validates Dimension is up (to kick off the job) and validate email is functional? Right now all email events are related to just Products or User permission changes. We had had an…
- over 4 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Dimension CM User Audit

Vibhor

Need a audit table to capture the DATE when Dimension CM USER deleted from frontend. At present we do not see any DATE columns in PCMS_USERS_PROFILE table. This would be really helpful for Auditing Purposes.
- over 4 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Custom Date Formats for Built-In Reports ie(MM/DD/YYYY)

joshpt

Current built-in Dimensions CM(14.5.1) reports currently output the date format as follows: Tue Aug/25/2020 12:00 AM This enhancement request is asking for this date format be editable with the typical date format characters such as: Input: MM/DD/YYYY…
- over 4 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Topic Stream Pull Request - Add an additional "ready to be merged" state.

darrenm

This essentially splits the "Approved" state in two. The current states for a Pull Request after the PR is published by the developer are "In Review", "Rework", "Approved", and "Completed". Add one more state between "Approved" and "Completed". It happens…
- over 4 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Disable use of default design part. Require user to explicitly specify design part.

darrenm

Provide a configuration item that would prevent any reliance on default design parts. This would require the user to specify a design part instead of merely accepting the default. Users often do not specify a design part, which results in new items getting…
- over 4 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Store last access date/time for each User

surie

It should be possible to report on the last access/login time of a user.
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Request to be able to change a part category after the part has been created

surie

Once a part has been created it should be possible for the administrator to change the part category similar to change item type.
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Admin Console restricting login access

surie

Request ability to restrict Admin Console access to only those users who can perform Administrative tasks.
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Support batch update of attributes rules

surie

In Dimensions CM, I sometimes need to modify the attributes rules of a request (an attribute for example has to be in read only for a specific role in a transition). As we have hundred products, I have to modify the attributes rules as many times as I…
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Clustered Indices for CM tables

surie

For self-written queries it would be a big enhancement to have also clustered indices on the cm tables, because the work with non-clustered indices is very slow within big data.
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas
Traceable Administrative Activities

surie

Partially delivered in CM 14.5. Covering all ‘Configuration Object Management’ options is needed to mark complete.
- over 5 years ago
- OpenText Dimensions CM
- Dimensions CM Ideas

Menu

OpenText Dimensions CM

We need to decrease the default session_timeout value "3600" of listener.dat of Dimensions 14.5.3, 14.6 and future versions.

If Dimension CM can add function for customized timeout (like less than 30 mins) setting in future release.

We recommend providing Dimensions upgrade installation kits in the future.

Update DOORS --> Dimensions Integration

show popup information message when mouse over (i) logo in Dimension CM Requests

Prevent the user to check in files when File size not more than XXXMB

DMCL command or web service to cancel a running build job

improve use of "Preview tab" in Open Request GUI for WebConsole

Each of the new work area need re-enter node user ID and node password

Add support for multiple request providers in Dimensions CM

Automatic Status email

Dimension CM User Audit

Custom Date Formats for Built-In Reports ie(MM/DD/YYYY)

Topic Stream Pull Request - Add an additional "ready to be merged" state.

Disable use of default design part. Require user to explicitly specify design part.

Store last access date/time for each User

Request to be able to change a part category after the part has been created

Admin Console restricting login access

Support batch update of attributes rules

Clustered Indices for CM tables

Traceable Administrative Activities

Resources

Menu

Popular Tags

Resources