OpenText ALM Quality Center Community

Alert Subscriber not available for display in the View and List Pane

Hanot Ogunjobi

The Alert Subscriber is not available in the list of options that can be added to the List and View Pane when using the "Format Column" option. The ability to see the location subscribed to an Alert from the View and List Pane would make accessing the…
- 3 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Quality Insight Executive Dashboard "Share Overview" option for widgets

Mike_Engel_

I would like to see functionality offered in QIS for admins to be able to push or Share Overview with users, much like in ALM homepage option
- 4 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Request for ALM Disaster Recovery best proactices

Wai mun Lee

Looking into ALM disaster recovery best practices guide. The support shared backup and recovery documents did not meet requirement for DR.
- 5 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Create a new user management function/feature to allow username changes.

Speed

Create a new user management function/feature to allow username changes. I am aware that ALM/QC uses the username today as the user namespace / USERS table primary key. Perhaps it is time to change that to use the USER_ID # so such a new feature can easily…
- 5 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
ALM UI's appearance remains unchanged

MeviDvash

Hello We've observed that despite the release of new versions, the ALM UI's appearance remains unchanged, resulting in a monotonous experience. This lack of visual enhancement diminishes the enthusiasm for upgrading, even with the introduction of new…
- 6 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Prevent disconnection (lockout) while editing after checking out a requirement.

syky

Situation: Users must check out entities to update them. If a user is disconnected while editing, they are locked out and cannot check back in. For example, a user checked out a requirement, modified the creation date, and left it without pressing OK…
- 6 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Prevent becoming disconnected (locked out) and losing data while editing after checking out.

syky

Situation: While editing a Requirement after checking out, and the period of no action reaches the time set in "Wait before disconnect" the user is disconnected. Upon re-login, a message states: "Unsaved data may be lost." Click OK. If Cancel is clicked…
- 6 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
ALM/QC an option is needed to restrict users to change their e-mail address

Dirk Paus

We would like avoid that ALM users are able to change their e-mail address in user properties. It should be possible for Site Administrators only. Perhaps an additional Site Parameter could help, e.g.: DISABLE_CHANGE_USER_PROPERTY_EMAIL_ADDRESS =…
- 7 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
It should be possible to disable/hide default users group in ALM

Mika Hirsimäki

Current Functionality The current ALM (Application Lifecycle Management) comprises predefined user groups with default permissions. Each group is assigned specific access rights to perform certain tasks within ALM. The default user groups are as follows…
- 9 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
ALM - extend Site Administrator / Site Users / Find functionality when no user is found in the users' list

Janos Hegedus

When a user search is initiated in ALM Site Administration and the user turns out to be not an ALM user, we simply get a “No match found” message in a notification window. If we want to create the user we have been searching for as a new user, we have…
- 10 months ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Need folder level restriction for user level in all modules.

Aravind R

Hi, We want to have a folder level restriction in all the modules in QC ALM. For examples: If we have 10 folders in test plan / test lab / requirement module. All the folders should not be visible for all users Some A person should have 4 folders…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
PII Protection

Hack h New

Implement ALM to promptly notify administrators of any alterations to Personally Identifiable Information, such as changes to user names, passwords, email addresses, and phone numbers.
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Authentification combination SSO and LDAP needed

NikolaF

Currently, if you want to use Single Sign On, you can add as fall back scenario only local authentification via ALM. Why we need a "Fall-back": As Admin I have different accounts for me as person and for admin issues to seperate the actions in the…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Calculate working hours with breaks, free and online with calculettemauricette.net

Dennis Aa

I have observed that people want a calculator which could calculate working hours with break adding options. So here is the solution: https://calculettemauricette.net/
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Unable to add bulk users through 'Import Users from CSV file

Jessica Fallas

Uploading bulk users through CSV file was available on previous ALM QC versions. But it is not available on version 17. It should be considered a defect. Picking / selecting manually each user from the group is not practically possible. Please take this…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Add ability to email new user after username is created to OP Site Admin

Geoff Culliton

Based on case: 02598286-No new user email sent RnD Team comment: " After review, this is a document mistake. This function is only available in SaaS environment. The document is not quite correct. But I think this is a reasonable requirement for OP…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Display User Full name

Archana Nulu

Can you auto populate user full name instead of Short name in QC fields? for example if we create any new requirement/test case/defect for below fields it is showing users short name. Requirements--> Author Test Plan--> Designer Defects--> Detected B…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
API/Tool for ALM New Configuration

Saptarshi Shome

Hello Team, To add a configuration item in ALM currently we are following the below steps after Login in to the ALM manually. We are looking for an automated process to pick the project name from a source (In this case service now/ text file/Database…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
ALM/QC – an option is needed to assign a defect to a user group

Dirk Paus

In our ALM project we have several teams that are working on defects. Each team has a own user group in ALM e.g. “Defect Responsible Team A”. Now we would like assign a defect to such a user group: In ALM groups can’t be selected in user fields -…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Question in Defect Module

Ibrahim Rajabi

Hi, Is there any possibility of being able to access the test plan module and the test cases there, when you are in the Defect module--->Defect Details and select Linked Entities? I know you can do it in the Test Plan module and then you see Entitiy…
- over 1 year ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Integration to 2 factor authentication platforms

Michal_O

Brief Description: Current services open to public internet require higher security and it would be nice to be able to do a two way authentication via sms / token Benefits/Value: Better security of the tool
- over 2 years ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Switching authentication to LDAP - "Apply to all" option for conflict resolution

raytomany

When switching authentication from ALM to LDAP, if the LDAP import wizard hits a conflict, it should be possible to select an option to resolve the first conflict, and to apply the same option to all subsequent conflicts. This would be useful where…
- over 2 years ago
- OpenText ALM Quality Center
- ALM/QC Ideas
Restrict or Inform about paraller logins to project in ALM/QC

Michal_O

Brief Description: When user try to login to the project where user is already logged user get warning that is already logged in Benefits/Value: In case that session freeze or client crash or user just open ALM second time, all sessions stays active…
- over 2 years ago
- OpenText ALM Quality Center
- ALM/QC Ideas
ALM Client and Webrunner setup - keep rights and roles aligned

Sven Beisiegel

Hi, I am currently facing the situation that a role which is working perfectly for us using the ALM client, fails in Webrunner. To make it work in Webrunner as it does for the ALM client would require me to give additional rights which I do not want…
- over 2 years ago
- OpenText ALM Quality Center
- ALM/QC Ideas
HPALM 16.0.0 Accessibility issue( JAWS(Job Access With Speech) is not fully compatible with ALMQC).

Sanaz Hosseini

visually impaired users need screen reader that works fine with ALMQC. we have JAWS in our organization for this purpose. Very first screen when user open HP ALM 16 it ask for user name and then email address. It is accessible with JAWS. Second…
- over 2 years ago
- OpenText ALM Quality Center
- ALM/QC Ideas

Menu

OpenText ALM Quality Center

Alert Subscriber not available for display in the View and List Pane

Quality Insight Executive Dashboard "Share Overview" option for widgets

Request for ALM Disaster Recovery best proactices

Create a new user management function/feature to allow username changes.

ALM UI's appearance remains unchanged

Prevent disconnection (lockout) while editing after checking out a requirement.

Prevent becoming disconnected (locked out) and losing data while editing after checking out.

ALM/QC an option is needed to restrict users to change their e-mail address

It should be possible to disable/hide default users group in ALM

ALM - extend Site Administrator / Site Users / Find functionality when no user is found in the users' list

Need folder level restriction for user level in all modules.

PII Protection

Authentification combination SSO and LDAP needed

Calculate working hours with breaks, free and online with calculettemauricette.net

Unable to add bulk users through 'Import Users from CSV file

Add ability to email new user after username is created to OP Site Admin

Display User Full name

API/Tool for ALM New Configuration

ALM/QC – an option is needed to assign a defect to a user group

Question in Defect Module

Integration to 2 factor authentication platforms

Switching authentication to LDAP - "Apply to all" option for conflict resolution

Restrict or Inform about paraller logins to project in ALM/QC

ALM Client and Webrunner setup - keep rights and roles aligned

HPALM 16.0.0 Accessibility issue( JAWS(Job Access With Speech) is not fully compatible with ALMQC).

Resources

Menu

Popular Tags

Resources